When the heating of the water occurs, gases are generated between them the dissolved oxygen. This water, when transported and stored in tanks and steel pipes, produces oxide, which is dragged, giving rise to water with a reddish orange color (rust), and in the case of copper alloy pipes, cuprous-cupric oxide will form, causing Significant localized corrosion.
Con el fin de evitar las consecuencias nocivas para las instalaciones, existen técnicas de Tratamientos Electrolíticos del agua que ayudan a eliminar los problemas anteriormente indicados.
This procedure is based on restoring the chemical balance of the water, and eliminating the harmful elements present in it.
The WATERPRO electrolytic protection method is based on the installation of special aluminum alloy anodes connected to a direct current controller device inside the water tanks. The surface of the steel structure is connected to the cathode, therefore it is fully protected.
WATERPRO electrolytic protection is feasible in pipeline networks, because whose protection is combined with an electrolytic aluminum dissolution unit. Aluminum ions imparted into the water are strong corrosion inhibitors and form a thin coherent protective layer of aluminum and silicon oxides with a maximum thickness of 0.1 to 0.2mm along the inner surface of the steel tubes. Protection against corrosion is achieved, while at the same time the formation of carbonate deposits (scale) is prevented.
If you need more information about this method of anticorrosion, antifouling and antilimescale, you can write to our email [email protected]
